Our regular 700 Series – the heart of Ever-Power swiftness reducer products – has been serving industry reliably for over a decade. Its proven modular style has set the sector standard for overall performance and may be the most imitated product in today’s worm gear velocity reducer market. But why accept a knock-off when you’re able to have the original – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting flexibility allows for installation in practically any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, as well as greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Ever-Power worm gearboxes have earned a popularity to be an industry benchmark worldwide. Our achievement came from our relentless drive for quality with state-of-the-art technology, all while offering worm gearboxes are inexpensive prices. High flexibility accorded through a wide choice of mounting choices, shaft configurations and motor interfaces, makes the Ever-Power worm gearbox the default choice for the market. The helical-worm and the double-worm version, with or without the torque limiter, add up to the advantage, creating an extremely versatile drive system.
Ever-Power Worm gearboxes provide high torque with low acceleration gear ratio. Being simple and compact in design, these gears can perform higher gear ratio compared to the helical gears. These worm decrease gears having screw type characteristics act like helical gears, but its helix position is typically comparatively larger) and its body is generally quite lengthy in the axial direction. The gears in these gearboxes can be correct or left-handed depending upon the purpose.
Mounting choice include universal housing, part flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (one or dual), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a type of interlocking gear made up of a worm shaft and worm wheel. The worm is definitely shaped such as a screw and the worm wheel is certainly a kind of gear machined to possess a tooth profile with the same configuration.
The procedure of a worm gear is similar with that of a bolt and nut. The principle is the same as a nut that is fixed to ensure that it cannot rotate and therefore progresses in the axial direction when the bolt is usually turned.
The design of a worm gear is thought of through the relationship between the rack and spur gear on the middle plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel simply by one tooth. Because of this, in a 1 speed decrease gears, the wheel could be manufactured therefore that it will be rotated 1/60 (1/120 in special applications).
Orthogonal shaft The shafts are aligned orthogonally because of the structure. This characteristic can help you layout the turning transmitting direction at the right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation direction of the worm wheel by changing the screw path.
A wide variety of shaft layouts The wide variety of shaft layouts is one of the top features of interlocking gears.For instance, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., combine for a total of 14 types (Body 2) and, if attachment orientations are included, it is possible to pick from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel can be characteristic because the contact is certainly linear and the relative slide is great. In comparison with rolling power transmission, noise and vibration are really low. For this reason, this technology is used to drive medical gear, elevators and escalators, etc.
The principal specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when selecting a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the correct gear are described in the maker catalogs and the series and models ought to be selected according to those procedures. Particular care ought to be taken in essential areas such as selecting the load 
index, calculating the overhang load and examining heat rated capability from the manufacturer.
Cautions during use
When utilizing a worm reduction gears, the heat produced through the initial period of make use of is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is paramount to sufficiently attaining the performance of the worm reduction gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it is necessary to improve the lubricating oil and also to change the lubricating oil from then on about 1 time each year according to the operation manual provided by the manufacturer.
Product Description
The Worm Reduction Gear Box is supplied by our company is of supreme quality. Our products are made through the use of premium quality materials and enhance technology at our vendors end. These are widely used in a variety of sectors. Our products are easily available at an extremely low market prices.
Motor Mount Frame Options
TEC Motors, worm reduction gearbox.
Option A-160 B5 Framework, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Attach.
High efficiency and secure operation. High load capability and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox output speed (rpm).
Higher ratios on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the industry worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown cost effectiveness.Absolute flexibility is distributed by the wide choice of several installation options, shaft configurations and motor interface, all offered as standard. The helicalworm and the doubleworm edition, with or without the torque limiter, also add up, creating an extremely versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 level C TO 80 level C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, having a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell casing + coupling) provides great versatility to match a broad range of applications and provides higher efficiency compared to the compact series XC, where in fact the emphasis is on space efficiency.
Series H supplies the same features because series X with an added plus: a spur gear pre-stage at the insight end provides higher functionality and a broader range of ratios than the X series.
Frame sizes 110 and 90 include a cast-iron casing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy metal and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow result shaft comes as standard.
Broad range of options available:
second input, result flange, single or dual extension result shaft, torque limiter with through cable, torque arm.
