Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General 
Explanation: New fan motor, taken off unused 18” or 24” China Air Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your Electric Fan Motor electric engine, capacitor and quickness control switch is still hooked up however the cord itself is normally detached as seen in the photos. (Find “Control Notice” below for change type.)
T (See “Program Notice” below for make use of in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” lengthy with a collection screw even. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and also to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine just as (but you have a rotating knob and you have got a pull-chain). In the event that you order several electric motor at a time, we can do our better to supply your purchase with each one kind of control or the excess.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan program. This is a totally enclosed fan electric engine and made to have constant ventilation over the engine casing for cooling. The housing isn’t vented and the electric motor will overheat and enter automatic thermal overload if run in a nonfan system where there isn’t strong ventilation past the engine. (Caution Note: the electric motor will restart immediately when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the motor and lead it to proceed into automatic thermal overload. (Your lover blade from another producer may have a steeper blade angle.)
Origin: This electric engine is manufactured in China.