Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Air flow Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed electric fan motor china control switch. All the wiring between your electric engine, capacitor and quickness control change is still installed nevertheless the cord itself is generally detached as observed in the photos. (Find “Control Notice” below for change type.)
T (See “App Notice” below for make use of in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” long with a collection screw soft. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take note: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine just as (but you possess a rotating knob and you have a pull-chain). If you order several electric motor at the same time, we will do our better to supply your order with each one sort of control or the excess.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan app. This is a completely enclosed fan electric electric motor and designed to have constant ventilation over the electric motor casing for cooling. The casing isn’t vented and the electric electric motor will overheat and enter automated thermal overload if run in a nonfan plan where there isn’t strong ventilation past the motor. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the motor and lead it to proceed into automated thermal overload. (Your companion blade from another producer may possess a steeper blade angle.)
Origin: This electric engine is manufactured in China.