Warranty: 1 Yr
Tailored help: OEM, ODM, OBM
Model Number: GD10-one
Software: Foodstuff and Beverage Business, Pharmaceutical business, Water Therapy Solutions, Higher Reliable Content material or No Solid Content, 1mpa~3mPas)
Medium that is effortless to be generated and swelled
Shearing sensitive medium
Medium with erosion
Medium with/with out self lubrication
Erosive medium (PH=1~fourteen)
Adhesive medium
Toxicity hazard medium

Composition Diagram of Sanitary One Screw Pump

OutletTie RodStatorScrew ShaftCommon JointInletConnecting ShaftFilling Seat

Filling IncludeBearing SeatBearingDriving ShaftBearing CapCouplingFoundationMotor

Major Parameter of Sanitary One Screw Pumps

ProductMovement Charge(t/h)Electric Electrical power
Connection EndsDischargePressure
CP10-1.five.37 1400 20 Clamp/union/flange .four
CP15-11.55 960 twenty five Clamp/union/flange .4
CP20-oneone.5.75 960 32 Clamp/union/flange .four
CP25-121.1 960 32 Clamp/union/flange .6
CP30-13one.5 960 forty Clamp/union/flange .six
CP35-onefivetwo.2 960 fifty Clamp/union/flange .6
CP40-1seventhree 960 fifty Clamp/union/flange .6
five.five2.two 720 fifty Clamp/union/flange .6
CP45-19four 960 fifty Clamp/union/flange .6
73 720 fifty Clamp/union/flange .6
CP50-onethirteenfive.5 960 sixty five Clamp/union/flange .6
10four 720 sixty five Clamp/union/flange .six
CP55-oneeighteenseven.5 960 seventy six Clamp/union/flange .six
thirteen5.five 720 seventy six Clamp/union/flange .six
CP60-12211 960 89 Clamp/union/flange .6
177.5 720 89 Clamp/union/flange .six
CP65-1thirtyeleven 720 eighty Clamp/union/flange .6
CP85-160fifteen 720 100 Clamp/union/flange .six

ApplicationFoodstuff industry: ketchup, CZPT variable speed generate variator frequency inverter .75kW 1.5KW 2.2KW VFD mashed potatoes, peanut butter, yogurt, refreshing product, ice cream, cheese cubes, whey, beer, wort, yeast, fruit juice beverages, vegetable paste, jam, jelly, and so forth.
Petroleum sector: conveying crude oil, mixture of crude oil and water, combination of coal discipline gasoline and drinking water, etc.

Relevant Photographs

Positive aspects

oneBroad assortment of stress and stream.
The strain is about 3.4-340 kgf/cm2, and the circulation rate can attain 18600cm3/min
2The variety and viscosity range of the conveyed liquid are wide
threeDue to the fact the inertial force of the rotating components in the pump is lower, it can use a higher velocity
fourExcellent suction overall performance and self-priming ability
5Uniform and constant flow, reduced vibration and minimal noise
sixIn comparison with other rotary pumps, it is significantly less delicate to incoming gas and grime
sevenSolid framework and installation Upkeep is easy
Business Profile

HangZhou Compass Machinery Co.,Ltd is one of the manufactures which are able of producing higher precision stainless metal sanitary equipment and pipeline link components.We are a contemporary business which integrates scientific research and generation. Compass can offer a selection of products,this kind of as sample valve,divert valve, blend proof valve,strain reduction valve, 400v ac 3 section vfd frequency inverter 22kw variable frequency drive 30hp frequency variator speed regulator for induction motor handbook and pneumatic butterfly valve, verify valve, diaphragm valve , ball valve, pipe fitting, manhole go over, pump, tube/pipe, tanks and other related goods. All goods can be manufactured in accordance to distinct components and industrial normal, this sort of as SMS, DIN. 3A, ISO, RJT, DF, BS, DS and BPE. Our merchandise are extensively used to dairy, food, beer, beverage, chemical industrial of tools, and beauty industries. All specialized elements have achieved the global leading levels and are in conformance with GMP needs.

  • Workshop __________________________________________________________________________
  • Senough Area_______________________________________________________________________
  • FAQ
    Q1. Are you a investing firm or factory?We are a manufacturing factory.Q2. What is the payment phrases?For little tests orders,we acknowledge Paypal,Western Union,T/T and credit history Card.For mass orders,we settle for T/T and L/C.Q3.How do you handle the good quality?Quality manage is really crucial to avoid material mixing and poor quality.We manage the quality from commencing to the finish.Weonly have 304 and 316L 2 diverse materials.a hundred% inspection on raw material.During generation,diverse materials in diverse area.After materials are concluded, New design and style Shaft Mounted Reducer Electric Motor Reduction ninety Diploma Gearbox Variator Transmission with CE certification we select ten% for inspection.If there is .1% dilemma in ten%,then no justification to go in advance for inspecting 100% of the supplies.This fall.How lengthy is your shipping and delivery time?For normal generation in 7-10days.For bulk buy in 15-25days.
    Again to Home

    What is a worm gear reducer?

    The worm gear reducer is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
    worm_reducerHollow shaft worm gear reducer

    Worm gear reducer is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducers are prone to oil leakage, which can be a problem for a number of reasons.
    Hollow shaft worm gear reducers are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
    Another type of worm gear reducer is the multi-stage variety. This gear reducer has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer has low noise, low vibration and low energy consumption.
    Worm gear reducers offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducers that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer has the characteristics of lower price and better torque output.
    hourglass worm gear

    The hourglass type worm gear reducer has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
    Another major advantage of the hourglass worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The hourglass worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
    Agknx worm gear reducers are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer stems from Sumitomo Heavy Industries’ extensive experience in gear reducers. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
    Hourglass worm gear reducers are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
    worm_reducerDouble throat worm gear

    There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
    Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
    The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
    The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
    Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
    Brass worm gear

    The basic working principle of the brass worm gear reducer is the same as that of the traditional worm gear reducer. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
    Double-thread worm gear reducers are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
    The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducers with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
    I260 series worm gear reducers are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer is designed for low to medium-horsepower applications. This gear reducer is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducers.
    worm_reducerBrass worm gear

    Brass worm gear reducer is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer also has the ability to generate high torque. However, it is important to understand that this gear reducer has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
    Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
    Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
    Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

    China Sanitary Stainless Steel SS316L Single Stepless Variator Screw Pump with High Viscosity     worm drive gear reducerChina Sanitary Stainless Steel SS316L Single Stepless Variator Screw Pump with High Viscosity     worm drive gear reducer
    editor by czh 2023-02-15