Model Number: MD300-C0015G3
Certification: CE ISO9001
Rated Power: 1.5KW
Nominal Voltage: 380V
power phase number: 3 phase
Overload: 150%- 60s,180%- 3s
Output Frequency: 0-500hz
Output waveform: PWM
Control model: V/F,SVC
Application: 3 Phase AC Asynchronism Motor
Other service: OEM
Packaging Details: All the product are packaged with single small carton or plywood crate.
3 Phase 380v Variable Frequency Drive 1.5kw Speed Variator
|AC 380V (-15%~+30%) 1.5kw
|Output Frequency Range
|V/F Control, Sensorless Vector Control
|RS-485, which support MODBUS protocol,this is option
|Less than 5.9m/s
|protect from over current, over voltage, under voltage, over temperature, phase failure, over load etc.
MD300 series frequency inverter detail size and current
|Dimension mm H *W * D
|Installation size mm H1* W1
|Over load capability
|G type:150% rated current 60s;180% rated current 3s
|P type:120% rated current 60s;150% rated current 3s
|Auto torque boost function; Manual torque boost 0.1%~30.0%
|Linear V/F, multi-point V/F and square V/F curve(power of 1.2,1.4,1.6,1.8,2)
|2 ways: separation and semi-separation
|Straight line or S curve acceleration and deceleration mode,
|Four kinds of acceleration and deceleration time. Acceleration and deceleration time range from 0.0s to 6500.0s
|DC braking frequency:0.00Hz to maximum frequency. Braking time:0.0s to 36.0s
|Brake current value:0%-100%
|Jog frequency range:0.00Hz~50.00Hz;
|It can realize at maximum of 16 segments speed
|Multiple segment speed running
|Running via the built-in PLC or control terminal.
|It is easy to realize process-controlled closed loop control system.
|Auto voltage regulation (AVR)
|It can keep constant output voltage automatically in the case of change of network voltage.
|Over-voltage/current stall control
|It can limit the running voltage/current automatically and prevent frequent over-voltage/current tripping during the running process.
|Quick current limit
|Minimize the over-current fault, protect normal operation of the AC Drive.
|Torque limit & control
|“Excavators” characteristics, automatically limit torque during operation, prevent frequent over-current tripping. Closed loop vector mode can realize the torque control.
|Instantaneous stop non-stop
|When instantaneous power off, voltage reduction is compensated through load feedback energy, which could make AC Drive keep running in a short period of time.
|Rapid current limit
|To avoid AC Drive frequent over-current fault.
|Timing control function:set time range 0Min~6500.0Min.
|Operation panel reference, control terminal reference and serial communication port reference. These channels can be switched in various modes.
|There are totally 11 types of frequency sources, such as digital reference, analog voltage reference , analog current reference, pulse reference, MS speed, PLC, PID and serial port reference.
|4 digital input terminals.
|2 analog input terminals.
|1 supporting 0-10V voltage input or 0~20mA current input terminal.
|2 relay output terminals.
|2 analog output terminals, supporting 0~10V voltage output or 0~20mA current output.
|Equipped with keyboard potentiometer or coding potentiometer.
|It can implement power-on motor short-circuit detection, input /output phase loss protection, over current protection, over voltage protection, under voltage protection, overheating protection and overload protection.
|Indoor, and be free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt.
|-10 ℃ to +40 ℃ (Derating use when under ambient temperature of 40 ℃ to 50 ℃)
|Less than 95%RH,without condensing
|Less than 5.9m/s (0.6g)
Packaging & Shipping
FAQQ 1: Are you trading company or manufacturer ?A: We are factory.
Q 2: How long is your lead time?A: Generally it is 3-7 days if the goods are in stock. or it is 10-20 days if the goods are not in stock, it is according to quantity.
Q 3: Do you provide samples ? is it free or extra ?A: Yes, we could offer the sample,but we will charge the sample fee and the cost of freight.
Q 4: What is your terms of payment ?A:We accept T/T, L/C and CASH.
Q 5: What is the standard of package?
A. Export standard package or special package according to customer requirement.
Q 6. Is there any discount ?
A. The discount will depend on the quanlity you purchase.
Q 7. What is your supply capacity?
A. The daily output of the factory exceeds 2000 PCS.
Q 8.Do you provide warranty for the goods?
A. Yes, we provide 18 months of warranty for all the goods from us.
Q 9.Could M-driver provide technical support?
A.We’ have more than 15years experience in this field. If there’s any problem, please feel free to contact us, we’ll provide suggestion from our engineer to help you solve the problem.
What Is a Speed Variator?
A Speed Variator is an industrial device that alters the speed of a motor to adjust the output of a machine. It is a hydrodynamic device that was invented by Italian industrialist CZPT.
Dissected mechanical speed variator
The Mechanical Speed Variator Dissectible is a unique training tool showcasing a fully restored industrial mechanical speed variator. This realistic training tool features a 7-gauge formed-steel baseplate and is painted with a tough urethane finish. It provides an in-depth experience of mechanical drives through disassembly and inspection. The training aid also includes applicable installation and maintenance manuals.
A mechanical speed variator is a general purpose speed changer that applies the mechanical variable speed transmission system. Unlike hydraulic variators, the mechanical speed variator works by transferring power by friction. It also allows the engine to operate at maximum efficiency over a range of speeds. A mechanical speed variator is much simpler in its working principle than a hydraulic one, as it is based on gears within the machine. Gear ratios can be changed to vary output speed and torque.
Various brands offer different types of mechanical speed variators. Most of them have full-metal construction, though the ideal material for these devices is stainless steel or cast iron. Steel-based materials are preferred for speed variators because they can handle extreme temperatures, pressure, and high-pressure conditions.
Gear-type automatic stepless speed variator
The Stepless Speed Variator is widely used in various production lines. The basic components of this device include a four-pole motor and a gearbox. It has a large range of variation speed and a high degree of accuracy. This device can be controlled manually or by a PLC. It increases production efficiency and reduces the cost of electricity and maintenance.
The Gear-type automatic stepless speed variator is a new type of speed variator for machines, especially transport vehicles. It aims to overcome the drawbacks of existing speed variators. It comprises a central shaft, a gear-holder, a damping mechanism, and a one-way clutch. The speed range of a Gear-Type Automatic Stepless Speed Variator is the same for both forward and reverse operations.
Another type of automatic stepless speed variator is the Continuously Variable Transmission (CVT), which uses a variable-width ratchet and a rubber or metal belt to transfer power. This device has many advantages, including a small size and low cost, and it operates at high efficiency. Another advantage is its low fuel consumption. However, its disadvantage is its limited power and torque. Therefore, it is often used in low-power, low-torque motors.
A Gear-Type Automatic Stepless Speed Variator offers many benefits, including an integrated design, long life, and high durability. Its unique feature is the ability to adjust the speed and gear ratio continuously. It can be used in both electric and mechanical vehicles. However, the CZPT AV Speed Variator offers the same benefits, but with a smaller size and simpler structure. It also features abrasion resistance and toughness.
Hydrostatic speed variator
The Global Hydrostatic Speed Variator Market is expected to grow substantially over the next five years. This report provides information on major factors driving growth in this market. It also provides important statistics and data on regional and global markets, as well as the competitive landscape. Additionally, it includes a comprehensive study of the different segments of the Hydrostatic Speed Variator market, including their respective size, sales, and growth rates.
The Hydrostatic Speed Variator market in the United States is expected to reach USD million by the end of 2021, and is projected to grow at a CAGR of % during the forecast period, 2022-2028. In addition to the United States, Germany and China will both contribute to the growth of the Hydrostatic Speed Variator market over the next few years. Additionally, South Korea and Japan are expected to show considerable growth over the next six years.
The report also provides an assessment of the key players in the market, including their latest developments and strategies. In addition, it provides a dashboard view of the top companies in the Hydrostatic Speed Variator market. It also presents analysis on key management metrics and includes the company’s SWOT and PEST analysis.
The V series hydrostatic speed variator is a high-performance, rugged, and durable product. It can operate at 30 hp and is ideal for industrial applications. The modular design of this product allows for easy modification and adjustment to meet specific requirements. It is also easy to operate, with no learning curve or electrical problems.
CZPT Variator Size VAR 2
The CZPT Variator Size VAR 2 is an electronic transmission that can be used to shift gears in various applications. Its name is taken from the word variator, which stands for variable. The transmission works by converting energy into mechanical torque. This helps the engine to deliver the desired torque and speed to the wheels. It can also be used in karting.
There are five sizes available, and they come with a five-speed change ratio. The output speed is changed using a control handwheel with a direct speed position readout. Alternatively, an electric servomotor with a limit switch device is used. A proximity sensor is also available, which provides a digital display of output speed.
The CZPT Variator Size VAR 2 can be purchased from CZPT Engineering. The company also makes other products for the market. Among these are the Variator Size VAR 2 and Variator Size VAR 0. It is important to note that the VAR2 is pre-lubricated with synthetic oil ISO VG 320.
Various applications of the CZPT Variator Size VAR 2 include zagoret’sia, razdviganiia shkivov, and regulation of the CVT system. These applications require a lot of power, and the Variator Size VAR 2 does not disappoint.
The CZPT Variator Size VAR 2 is an excellent option for anyone looking to improve their productivity and reduce their costs. This machine is easy to install and maintain and allows you to use the torque of the motor. It is also compatible with most common transmission systems. The CZPT Variator Size VAR 2 comes with a three-year warranty.
The CZPT Variator Size VAR 2 is a versatile tool for changing the size of a vehicle’s engine. The VAR2 is made of high-grade steel for durability and easy maintenance. It is made to withstand high torque. It has an adjustable speed range and has a large capacity. It also features a convenient key lock.
CZPT Variable Speed Drive
CZPT is an Italian gear manufacturer. Founded in 1980, the company is considered an expert in variable speed gears. It offers five different sizes of variable speed drives with an adjustment range of 5:1. Its spur gears come in gray cast iron and aluminum, and there are three reduction stages available.
CZPT gearboxes are available in four different sizes for single-stage reduction, nine for two-stage reduction, and nine for three-stage reduction. These gearboxes can be supplied with an IEC input flange for IEC electric motors, or a solid input shaft for the CV version. Each size also features a wide output shaft diameter.
Variators are available in five different sizes and are available with a speed change ratio of 1:5. This makes them ideal for simple applications requiring minimal electrical adjustment. CZPT offers over 1,000 authorized distributors in North America. If you are interested in learning more about CZPT products.
CZPT has extensive distribution networks worldwide, allowing it to provide world-class service and fast delivery. CZPT also provides ATEX-certified products for applications in potentially explosive atmospheres. These products are compliant with the European directive ATEX 2014/34/EU. They are suitable for both industrial and commercial applications.
editor by czh