Ever-Power Company , announces its right angle NEMA gearbox designed to IP65 specs for use in clean down applications in packaging tools and similar machinery. Rated backlash is 30 arc-minutes with choices for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless bearings with seals and Nitrile o-bands shaft seals on both input and output. All fasteners are stainless steel. Hard anodized aluminum or 316 Stainless housings are available. Customizing for apart from NEMA motors or your specific application is very easily done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 gear ratio. It’s a great choice to applications that with unique space but need low acceleration and/or high torque.
Manufacturer Part Amount: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Keeping Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Body Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Replaced by the 3325_0, a electric motor with the same NEMA size and same torque.
This NEMA-17 motor has an integrated Planetary gearbox with a 52/11 :1 ratio. It creates 16.2 Kg-cm of torque at 1.68 Amps.
When connected to a 1067 – EP, the 3317 includes a maximum quickness of a little over 900 RPM. At the output of the gearbox, the stage angle is just a little under 0.35°. With all the step position in calculations, you should derive the exact step angle by dividing 1.8° by the gearbox decrease ratio.
This specific revision of the 3317 is manufactured by a different producer, but should behave very much like the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, free of maintenance and can be mounted in any path with their slip fit “O” ring design. Low to high reduction ratios, flange attach or foot install types, right position or hollow shaft correct angle types available. Match NEMA C-Face AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Face, 140TC and 180TC input flanges
Inline Helical Gear Velocity Reducers
Right-Angle Hypoid Gear Speed Reducers
Downloads & Reference
NEMA C-Face Quickness Reducers Lineup
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Attach)
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Install)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Speed vary based on insight voltage and frequency, please review item specifications for details.
In comparison to a spur equipment of around the same pitch size, Helical gears can transfer high loads at greater speeds. That is due to the gradual engagement of the teeth and simple transfer of the load.
Lightweight and Compact
Die cast aluminum equipment housings make these velocity reducers light in weight, allowing engineers to create more economical mounting provisions
High-quality synthetic grease is utilized in every gearboxes. They are stuffed at the factory and do not need maintenance filling or level checks. This saves valuable time at create and eliminates concern for costly oil disposal required by the EPA.
Mount in Any Direction
These gearboxes are sealed with machine “slip” fit “O” rings and dual lip springtime shaft seals on both the motor and input shaft and result shaft driver. Therefore, the gear motors can be mounted in any conceivable path without concern for the positioning of a breather plug.
NEMA Result Flange Planetary Gearboxes, Max. Ratio 1000:1
Frame Size:42.6/60/90/115/145 mm
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
The Ever-Power EP Series gearboxes are equipped with a NEMA output flange with metric shaft, to provide exceptional torque ratings and convenience of a lot of present servo and stepper movement control applications. The gearboxes are drop-ins for most industry standards and available from solitary to three stages with ratios 3:1 up to 1000:1, the best backlash of < 6 arc-minutes. Adapters for all servo and stepper motors.
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash only 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, maintenance free
Reliable operating performance, affordable integration