“H” CLASS Refuse Drag Chains is utilized for conveying sawdust,wood chips, pulp, garbage, tankage, ashes, and other abrasive spend through either wooden or metal troughs. Due to its huge, wide opening region, “H” CLASS Refuse Drag Chain provides sizeable carrying capacity 
when managed at moderate speeds.
Leading face of every barrel is flat, providing a wide area to push material along the trough and also to keep the chaim from riding outrageous of the material. The rounded inner part of the barrel is certainly carefully shaped to create excellent Leaf Chain sprocket get in touch with. Sidebars are reinforced with wearing shoes which provide both
additional wearing surface and stiffening for the link. A vertical member on each sidebar assures added link rigidity and protects the pin from harm.
“H”CLASS Refuse Drag Chain is available in EVRT-POWER Promal or Duramal with a tensile power selection of 36,400 to 52,000 pounds. This tough working chain is available in a pitch range of 5.000 to 8.000 inches. Each link is produced in accordance with manufacturer’s specifications and may end up being interchanged with links created by additional chain manufacturers. “H”CLASS Refuse Drag Chain is available in riveted construction just. Grease chambers, cored into each link’s barrel, hold grease which lubricates pins.
Wide faced sprockets, either of machined or cast steel, are recommended for”H” class Refuse Drag Chain procedure. Links should always be run in the direction of the closed barrel.
