The EP Greenhouse Gearbox is a compact and lightweight reduction gearbox with a limit switch system that’s suitable for assembly of a locally available electric electric motor. The Gearbox is used in manually-controlled or climate-controlled ventilation and screen systems in greenhouses. The quick and easy-to-installEP Gearbox is definitely rainproof and windproof. The Gearbox has a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise Gearbox for Greenhouse includes a gearwheel Gear motors for Greenhouse transmission and a worm wheel transmission, which are integrated within an aluminium precision housing. The self-braking worm wheel transmission ensures that the drive shaft is definitely locked when the decrease gearbox is not running. The completely sealed reduction gearbox comes with an growth chamber with a diaphragm to keep the gear oil at a minimal pressure under all situations, even at high temps. Thanks to the usage of an expansion chamber, the Gearbox can be installed in any position. There are no restrictions, since there is no need for a bleed plug. The sealed reduction gearbox keeps the apparatus oil of the Gearbox in optimal condition for its entire operating lifetime. The Gearbox is suitable for discontinuous use, operating course s3-30%, with a maximum activation time of 25 minutes.
THE APPARATUS box reduction gearbox comes with an FT85 motor assembly flange, on to which a suitable IEC standard motor can simply be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an integrated chamber and is usually enclosed by an impact-resistant plastic-type material cover. The limit change system is obtainable and simple to adjust. The limit change system’s maximum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The Gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The Gearbox for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of application of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temps of 0-60°C.
Ideal for discontinuous 
use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).