The EP Greenhouse Gearbox is a concise and lightweight reduction gearbox with a built-in limit switch system that’s suitable for assembly of a locally available electric motor. The Gearbox is utilized in manually-controlled or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-installEP Gearbox can be rainproof and windproof. The Gearbox has a high protection class (IP65) and can be used within an ambient temperature of 0-60 °C.
The low-noise Gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminium precision housing. The self-braking worm wheel transmitting ensures that the drive shaft is certainly locked when the reduction gearbox is not running. The fully sealed reduction gearbox comes with an expansion chamber with a diaphragm to keep the gear oil at a minimal pressure under all conditions, even at high temperature ranges. Thanks to the utilization of an growth chamber, the Gearbox could be installed in any placement. There are no limitations, because there is no need for a bleed connect. The sealed reduction gearbox keeps the apparatus essential oil of the Gearbox in optimal condition for its entire operating life time. The Gearbox is ideal for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction gearbox comes with an FT85 motor assembly flange, on to which the right IEC standard motor can simply be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed in an built-in chamber and is certainly enclosed by an impact-resistant plastic cover. The limit switch system is obtainable and simple to adjust. The limit change system’s maximum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The Gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The Gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperature gear reduction motor ranges of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).