China Emulsifying Mayonnaise Manufacturing Tank With Bracket Dispersant Homogenizer Agitator right angle worm reducer

Mixer Type: Homogenizer
Barrel Volume (L): 1 Car Engine Parts Crankshaft Pulley For Bmw N47 B37 B47 Engine Crankshaft Pulley so that the mixture fully emulsified, due to slow mixing for the same speed reverse left and right continuous, and ultimately the entire container of materials from top to bottom continue to cycle, mixed, homogeneous, emulsified.

Model	Effective	Emulsifying Motor			Agitator			Vacuum pump			electirc Heating power/kw	Steam heating pressure /Mpa
		Capcity/L
			KW	RPM	RPM	KW	KW	Limit Vacuum
ACE-50L	50	3	0-3600	0-65	0.75	0.75	-0.1	12	0.2
ACE-100L	100	4	0-3600	0-65	1.5	1.5	-0.1	24	0.2
ACE-200L	200	5.5	0-3600	0-65	2.2	2.2	-0.1	28	0.2
ACE-300L	300	7.5	0-3600	0-65	2.2	2.2	-0.1	32	0.2
ACE-500L	500	11	0-3600	0-65	4	4	-0.1	50	0.2
ACE-1000L	1000	15	0-3600	0-65	4	4	-0.1	54	0.2
ACE-2000L	2000	18.5	0-3600	0-65	7.5	5.5	-0.1	recommend steam hetaing	0.2

The ProcessSome typical recipes would be as follows:​ 1.In the first stage of production, the egg, which may be used in either liquid or powder form is dispersed into the water. This acts as the emulsifying agent.2.Remaining continuous phase ingredients are then added and mixed until dispersed and hydrated.3.The oil is added as rapidly as the continuous phase will take it up. This results in a dramatic rise in product viscosity as the emulsion is formed. The Problem1.Continuous phase ingredients are only a small proportion of the total formulation, but they perform vital functions. The mixing equipment must be capable of dispersing and hydrating these properly in a relatively low liquid volume. If the egg and other emulsifying agents are not properly dispersed and hydrated the emulsion can break during the oil addition stage.2.Hydration of stabilizers and thickeners is 1 of the most difficult mixing operations. The solution may have to be agitated for a long period to complete hydration. Agglomerates can easily form; these cannot be broken down by agitation alone. 3.Due to the high proportion of oil in the recipe the emulsion can break if the oil is not added to the continuous phase correctly. This is very difficult to control when the oil addition is done manually.Oil phase droplets must be reduced to the smallest size possible to maximize the surface area of oil within the continuous phase to ensure a stable emulsion. This is not readily achieved without specialized equipment.4.Aeration must be minimized or eliminated to maximize product shelf life. The SolutionAce has developed a unit for manufacture of mayonnaise for the ready-to-use market, R&D and pilot scale production. The unitis capable of carrying out the entire process, including rapid preparation of premixes, hydration of thickening and stabilizingagents and preparation of the final oil-in-water emulsion. Operation is as follows: Stage 1Water is recirculated from the vessel through the system by the specially designed In-Line mixer. The egg (either powder or liquid) is added to the vessel and is rapidly wetted out and dispersed into the high velocity liquid stream.Stage 2The remaining aqueous phase ingredients are then added to the vessel. Recirculation continues until the ingredients are fully dispersed and hydrated.Stage 3The oil feed valve is opened and oil is drawn from the hopper into the aqueous phase at a controlled rate. The aqueous and oil phase ingredients pass directly into the workhead of the In-Line mixer where they are subjected to intense high shear. This finely disperses the oil into the aqueous phase, immediately forming an emulsion. The vinegar (and/or lemon juice) is added with the last of the oil. Stage 4Recirculation of the product continues to ensure a uniform consistency as the viscosity rises. After a short recirculation period the process is completed and the finished product is discharged.The Advantages1.Ideal for smaller batches that are intended for immediate use.2.Aeration is minimized.3.The system practically eliminates operator error.4.Offers the batch-to-batch consistency and stability of mayonnaise manufactured in turnkey plant without the high capital expenditure.5.Yield of raw materials is maximized, as thickening agents are fully hydrated and other ingredients are correctly dispersed.6.The system is designed for handling high viscosity products without the need for additional pumps or auxiliary equipment.7.Easily adapted to variations in product type and recipe. Application:It is widely used in dairy industry, food industry, pharmacy, chemical industry, beverage and other industrial sectors, as heating, cooling, heat preservation, anti-corrosive, anti-corrosive, strong production capacity, Cooling, insulation, sterilization treatment or storage of slurry must be stainless steel cans, especially for pasteurization of milk and insulation, ice cream production line is the necessary equipment. Details Images Certifications FAQ Q1. What is your terms of packing?A: Generally, we pack our goods in a plywood case or carton package for small parts.If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.Q2. What are your terms of payment?A: T/T in advance, 30% as deposit, and finish 70% balance payment before delivery.We’ll show you the photos of the products and packages before you pay the balance.Q3. What are your terms of delivery?A: EXW, FOB, CIF, DDU.Q4. How about your delivery time?A: Generally, it will take 3 to 4 weeks after receiving your advance payment. The specific delivery time dependson the items and the quantity of your order.Q5. Can you produce according to the samples?A: Yes, we can produce by your samples or technical drawings.Q6. Do you test all your goods before delivery?A: Yes, we have 100% test before deliveryQ7: How do you make our business long-term and good relationship?A:1. We keep good quality and competitive price to ensure our customers benefit ; 2. We respect every customer as our friend, and we sincerely do business and make friends with them, Diesel luxury coach bus 18 seats mini bus right hand drive for sale no matter where they come from. Contact Us

A-Drive PWC single worm reducer

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducers. As a result, worm gears continue to be popular with engineers.

Agknx driver

Conical drive worm reducers are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducers are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm Reducer Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducers are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducers are ideal for a variety of applications.
RV series worm gear reducer is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducers have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducers are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
AGknx Single

Worm reducers can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducers work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducers have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducers can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducers are also susceptible to thermal stress. They run hotter than hypoid reducers, which reduces their useful life. In addition to higher heat, worm reducers can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
AGknx X & H

The AGknx X & H worm gear reducer series is a high-performance universal mount worm gear reducer. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

editor by Cx 2023-07-13