pto gearbox

2) Loosen the bolts only when fitting the shafts. DO NOT get rid of the bolts totally. If taken out they might fall into the housing and cause a failure. The box should be disassembled to retrieve the bolts if this happens.

1) Tighten bolts to avoid oil leaking in the course of operation. (The bolts have a seal beneath their heads.)

Just take care when tightening the 4 x locking bolts inside of the housing. These #imgurl[]#bolts repair the detachable splined shafts in location.

Notice: When fitting splined shafts.

Click on drawing to enlarge.

one:1.85 pace increaser with 13/four”Z20 splined output shaft.

For the current details regarding pto gearbox, go to