Ever-Power Corporation , announces its right angle NEMA gearbox made to IP65 specifications for use in wash straight down applications in packaging gear and comparable machinery. Rated backlash is usually 30 arc-minutes with choices for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless steel bearings with seals and Nitrile o-bands shaft seals on both insight and result. All fasteners are stainless steel. Hard anodized light weight aluminum or 316 Stainless housings are available. Customizing for apart from NEMA motors or your specific application is easily done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 gear ratio. It’s a good solution to applications that with particular space but need low velocity and/or high torque.
Manufacturer Part Number: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Holding Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Body Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Replaced by the 3325_0, a electric motor with the same NEMA size and same torque.
This NEMA-17 motor has an integrated Planetary gearbox with a 52/11 :1 ratio. It generates 16.2 Kg-cm of torque at 1.68 Amps.
When linked to a 1067 – EP, the 3317 has a maximum rate of just a little over 900 RPM. At the output of the gearbox, the step angle is just a little under 0.35°. With all the step position in calculations, you should derive the exact step position by dividing 1.8° by the gearbox decrease ratio.
This particular revision of the 3317 is made by a different producer, but should behave very much like the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, maintenance free and will be mounted in virtually any path with their slip fit “O” ring design. Low to high decrease ratios, flange attach or foot attach types, right angle or hollow shaft correct angle types available. Fit NEMA C-Face AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Encounter, 140TC and 180TC input flanges
Inline Helical Gear Speed Reducers
Right-Angle Hypoid Gear Speed Reducers
Downloads & Reference
NEMA C-Face Rate Reducers Lineup
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Mount)
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Mount)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Swiftness vary based on insight voltage and frequency, please review product specifications for details.
Compared to a spur equipment of approximately the same pitch size, Helical gears can transfer high loads in greater speeds. This is due to the gradual engagement of the teeth and even transfer of the strain.
Lightweight and Compact
Die cast aluminum gear housings make these speed reducers light in weight, allowing engineers to create more economical mounting provisions
High-quality synthetic grease is utilized in every gearboxes. They are stuffed at the factory , nor require maintenance filling or level checks. This saves valuable time at setup and eliminates concern for expensive oil disposal necessary by the EPA.
Mount in Any Direction
These gearboxes are sealed with machine “slip” suit “O” rings and double lip springtime shaft seals on both the motor and insight shaft and result shaft driver. Hence, the gear motors can be mounted in any conceivable direction without concern for the position of a breather plug.
NEMA Output Flange Planetary Gearboxes, Max. Ratio 1000:1
Frame Size:42.6/60/90/115/145 mm
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
The Ever-Power EP Series gearboxes are equipped with a NEMA output flange with metric shaft, to offer exceptional torque ratings and convenience of many of present servo and stepper movement control applications. The gearboxes are drop-ins for most industry standards and obtainable from solitary to three stages with ratios 3:1 up to 1000:1, the best backlash of < 6 arc-mins. Adapters for all servo and stepper motors.
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash only 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, maintenance free
Reliable operating performance, cost effective integration