admin

Marzo 19, 2020

Small Precison Worm Decrease Gearboxes
There are many of specifications you will need to consider when coming up with a worm gearbox selection.
First, what is the input and output torque requirements? Next, check vendor horsepower/torque charts and pick the correct worm equipment reducer.
If how big is the gearbox is going to be an important consideration then check the reducer dimension specifications, not all producers make compact units. Actually, working with the right supplier can help you not just find the right gear reducer but also prevent some of the most common mistakes in reducer selection. We provide a free guide to assist you find the appropriate supplier to utilize.
For low and fractional horsepower application you can expect two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major variations between both of these models. Both feature the hollow or solid result shaft. Both versions are compact and offer users a wide selection of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your unique application or project is essential to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes at the top and bottom
• Flush fitting bearing caps simple to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Correct Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is necessary. This right angle equipment motor is so versatile it can work just about anywhere.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power provides designed and built exclusive, high accuracy mini gearboxes that cannot be found somewhere else. Our miniature gearboxes are available in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide custom micro gearboxes that were created and built to meet your specific specifications.
Contact us for the mini gearbox your application requires, or ask for a quote upon a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, velocity reducers, gear drives, and gearmotors. All conditions can be used pretty much interchangeably. Please note that the links for our small gear drives include information on the full range of framework sizes for that series or design.
Bevel Box Micro Equipment Drive
Our bevel box miniature gear drives are software rated for the ideal balance of overall performance and price. Torque could be balanced to meet your RPM and working life requirements. Light-weight with low backlash functionality (as little as 1°, with option of 1/2”).
Output torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a concise package. They offer an output shaft at 90° from the input, and are available in gear ratios from 1:1 to 40:1. Light-weight but durable, with machined aluminum housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single input shaft that protrudes from reverse sides of the casing; output is usually a keyed bore. Regular single- and double-end shafts can be found and supplied with keys and retainer bands. An array of gear ratios and input sizes are available to meet up your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long term lubrication. They offer two insight shafts on opposing sides of the frame, with two output shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high performance overall performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes create an output at 90° from the insight. They deliver superior performance in an amazing array applications and are built with small footprints, making them perfect for operations where space is limited. They offer high efficiency with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and are rated for speeds up to 3,000 RPM. Aluminium housings and stainless steel gears and shafts make these inline spur gearboxes difficult and corrosion resistant, for your most demanding applications.
Result torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm gear reducers deliver superior performance with high efficiency, and show rugged building for challenging power transfer operations. Available in three equipment ratios (5:1, 10:1, 20:1), our small worm gearboxes are built in extremely compact footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and produce a custom miniature gearbox to meet up your unique specifications. We can produce customized micro gearboxes in virtually any configuration your application requires, with result torque levels as high as 900Nm. We can work from your gearbox styles, reverse engineer a preexisting unit, or assist you to develop an all-new style that provides the performance you will need. Demand a quote on a custom miniature gearbox or contact us to discuss your unique requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and special ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and output shafts with drive essential and retainer rings can be supplied to your specs for just about any of our hollow bore miniature gearboxes. We offer a fundamental selection of single ended or dual ended shafts to put together in these gearboxes. All gearbox shafts are given keys and retainer bands.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For E series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our software engineers to discuss your particular needs.
We provide a broad selection of misalignment shaft couplings in in . and metric bore sizes. In . and metric precision surface shafts can be found from stock.
Contact Us for High Performance Miniature Gearboxes
We will be the miniature gearbox experts. Our micro gear drive versions deliver superior efficiency in a little footprint, and are tough enough for challenging function environments. E mail us to learn more about our mini gearboxes, or demand a quote on a custom made model that is tailored to your needs.
Additional advantages of worm drive gearboxes include:

Contact us if you have concerns concerning small worm gearbox.